<longdesc>Amount of data to buffer for network streams before starting to display the stream (in seconds)</longdesc>
</local_schema>
</entry>
<entry name="volume">
<local_schema short_desc="Sound volume">
<longdesc>Sound volume, in percent, between 0 and 100</longdesc>
</local_schema>
</entry>
<entry name="window_on_top">
<local_schema short_desc="Whether the main window should stay on top">
<longdesc>Whether the main window should stay on top of the other ones</longdesc>
</local_schema>
</entry>
<entry name="audio_output_type">
<local_schema short_desc="Type of audio output to use">
<longdesc>Type of audio output to use: "0" for stereo, "1" for 4-channel output, "2" for 5.0 channel output, "3" for 5.1 channel output, "4" for AC3 Passthrough.</longdesc>
</local_schema>
</entry>
<entry name="debug">
<local_schema short_desc="Whether to enable debug for the playback engine">
</local_schema>
</entry>
<entry name="deinterlace">
<local_schema short_desc="Enable deinterlacing">
</local_schema>
</entry>
<entry name="shuffle">
<local_schema short_desc="Shuffle mode">
</local_schema>
</entry>
<entry name="repeat">
<local_schema short_desc="Repeat mode">
</local_schema>
</entry>
<entry name="auto_resize">
<local_schema short_desc="Resize the canvas automatically on file load">
</local_schema>
</entry>
<entry name="saturation">
<local_schema short_desc="The saturation of the video">
</local_schema>
</entry>
<entry name="hue">
<local_schema short_desc="The hue of the video">
</local_schema>
</entry>
<entry name="contrast">
<local_schema short_desc="The contrast of the video">
</local_schema>
</entry>
<entry name="brightness">
<local_schema short_desc="The brightness of the video">
</local_schema>
</entry>
<entry name="visual">
<local_schema short_desc="Name of the visual effects plugins">
</local_schema>
</entry>
<entry name="show_vfx">
<local_schema short_desc="Show visual effects when no video is displayed">
<longdesc>Show visual effects when playing an audio only file.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="tomboy">
<entry name="menu_note_count">
<local_schema>
<longdesc>Integer determining the minimum number of notes to show in the Tomboy note menu.</longdesc>
</local_schema>
</entry>
<entry name="enable_keybindings">
<local_schema short_desc="Enable global keybindings">
<longdesc>If true, the desktop-global keybindings set in /apps/tomboy/global_keybindings will be enabled, allowing for useful Tomboy actions to be available from any application.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="sound-juicer">
<entry name="volume">
<local_schema short_desc="Audio volume">
</local_schema>
</entry>
<entry name="audio_profile">
<local_schema short_desc="Audio Profile with which to encode">
<longdesc>The GNOME Audio Profile with which to encode.</longdesc>
</local_schema>
</entry>
<entry name="musicbrainz_server">
<local_schema short_desc="The MusicBrainz server to use">
<longdesc>If specified, this value will override the default MusicBrainz server.</longdesc>
</local_schema>
</entry>
<entry name="strip-special">
<local_schema short_desc="If to strip special characters from filenames">
<longdesc>If enabled, special characters such as space, wildcards and backslashes will be removed from the output filename.</longdesc>
</local_schema>
</entry>
<entry name="paranoia">
<local_schema short_desc="The paranoia mode to use">
<local_schema short_desc="The name pattern for files">
<longdesc>Do not specify an extension. %at -- album title %aT -- album title (lowercase) %aa -- album artist %aA -- album artist (lowercase) %as -- album artist (sortable) %aS -- album artist (sortable lowercase) %tn -- track number (i.e 8) %tN -- track number, zero padded (i.e 08) %tt -- track title %tT -- track title (lowercase) %ta -- track artist %tA -- track artist (lowercase) %ts -- track artist (sortable) %tS -- track artist (sortable lowercase)</longdesc>
</local_schema>
</entry>
<entry name="path_pattern">
<local_schema short_desc="The directory structure for the files">
<longdesc>%at -- album title %aT -- album title (lowercase) %aa -- album artist %aA -- album artist (lowercase) %as -- album artist (sortable) %aS -- album artist (sortable lowercase) %tt -- track title %tT -- track title (lowercase) %ta -- track artist %tA -- track artist (lowercase) %ts -- track artist (sortable) %tS -- track artist (sortable lowercase)</longdesc>
</local_schema>
</entry>
<entry name="eject">
<local_schema short_desc="Whether to eject the CD when finished extracting.">
<local_schema short_desc="Saves the currently viewed tab">
<longdesc>0 for the System Info, 1 for the processes list, 2 for the resources and 3 for the disks list</longdesc>
</local_schema>
</entry>
<entry name="view_as">
<local_schema short_desc="Determines which processes to show by default. 0 is All, 1 is user, and 2 is active">
</local_schema>
</entry>
<entry name="disks_interval">
<local_schema short_desc="Time in milliseconds between updates of the devices list">
</local_schema>
</entry>
<entry name="show_all_fs">
<local_schema short_desc="Whether information about all filesystems should be displayed">
<longdesc>Whether to display information about all filesystems (including types like 'autofs' and 'procfs'). Useful for getting a list of all currently mounted filesystems.</longdesc>
</local_schema>
</entry>
<entry name="graph_update_interval">
<local_schema short_desc="Time in milliseconds between updates of the graphs">
</local_schema>
</entry>
<entry name="update_interval">
<local_schema short_desc="Time in milliseconds between updates of the process view">
</local_schema>
</entry>
<entry name="kill_dialog">
<local_schema short_desc="Show warning dialog when killing processes">
<longdesc>Theme to use for the lock dialog.</longdesc>
</local_schema>
</entry>
<entry name="user_switch_enabled">
<local_schema short_desc="Allow user switching">
<longdesc>Set this to TRUE to offer an option in the unlock dialog to switch to a different user account.</longdesc>
</local_schema>
</entry>
<entry name="logout_command">
<local_schema short_desc="Logout command">
<longdesc>The command to invoke when the logout button is clicked. This command should simply log the user out without any interaction. This key has effect only if the "logout_enable" key is set to TRUE.</longdesc>
</local_schema>
</entry>
<entry name="logout_delay">
<local_schema short_desc="Time before logout option">
<longdesc>The number of minutes after the screensaver activation before a logout option will appear in unlock dialog. This key has effect only if the "logout_enable" key is set to TRUE.</longdesc>
</local_schema>
</entry>
<entry name="logout_enabled">
<local_schema short_desc="Allow logout">
<longdesc>Set this to TRUE to offer an option in unlock dialog to logging out after a delay. The Delay is specified in the "logout_delay" key.</longdesc>
<longdesc>The command that will be run, if the "embedded_keyboard_enabled" key is set to TRUE, to embed a keyboard widget into the window. This command should implement an XEMBED plug interface and output a window XID on the standard output.</longdesc>
</local_schema>
</entry>
<entry name="embedded_keyboard_enabled">
<local_schema short_desc="Allow embedding a keyboard into the window">
<longdesc>Set this to TRUE to allow embedding a keyboard into the window when trying to unlock. The "keyboard_command" key must be set with the appropriate command.</longdesc>
</local_schema>
</entry>
<entry name="lock_delay">
<local_schema short_desc="Time before locking">
<longdesc>The number of minutes after screensaver activation before locking the screen.</longdesc>
</local_schema>
</entry>
<entry name="cycle_delay">
<local_schema short_desc="Time before theme change">
<longdesc>The number of minutes to run before changing the screensaver theme.</longdesc>
</local_schema>
</entry>
<entry name="power_management_delay">
<local_schema short_desc="Time before power-management baseline">
<longdesc>The number of seconds of inactivity before signalling to power-management. This key is set and maintained by the session power-management agent.</longdesc>
</local_schema>
</entry>
<entry name="idle_delay">
<local_schema short_desc="Time before session is considered idle">
<longdesc>The number of minutes of inactivity before the session is considered idle.</longdesc>
<longdesc>This key specifies the list of themes to be used by the screensaver. It's ignored when "mode" key is "blank-only", should provide the theme name when "mode" is "single", and should provide a list of themes when "mode" is "random".</longdesc>
<longdesc>The selection mode used by screensaver. May be "blank-only" to enable the screensaver without using any theme on activation, "single" to enable screensaver using only one theme on activation (specified in "themes" key), and "random" to enable the screensaver using a random theme on activation.</longdesc>
</local_schema>
</entry>
<entry name="lock_enabled">
<local_schema short_desc="Lock on activation">
<longdesc>Set this to TRUE to lock the screen when the screensaver goes active.</longdesc>
</local_schema>
</entry>
<entry name="idle_activation_enabled">
<local_schema short_desc="Activate when idle">
<longdesc>Set this to TRUE to activate the screensaver when the session is idle.</longdesc>
<longdesc>The action to take when the battery is critically low. Possible values are "hibernate", "suspend", "shutdown" and "nothing".</longdesc>
</local_schema>
</entry>
<entry name="action_battery_sleep_type">
<local_schema short_desc="Whether to hibernate, suspend or do nothing when inactive">
<longdesc>The type of sleeping that should be performed when the computer is inactive. Possible values are "hibernate", "suspend" and "nothing".</longdesc>
</local_schema>
</entry>
<entry name="action_ac_sleep_type">
<local_schema short_desc="Whether to hibernate, suspend or do nothing when inactive">
<longdesc>The type of sleeping that should be performed when the computer is inactive. Possible values are "hibernate", "suspend" and "nothing".</longdesc>
</local_schema>
</entry>
<entry name="action_battery_button_lid">
<local_schema short_desc="Laptop lid close action on battery">
<longdesc>The action to take when the laptop lid is closed and the laptop is on battery power. Possible values are "suspend", "hibernate", "blank", and "nothing".</longdesc>
</local_schema>
</entry>
<entry name="action_ac_button_lid">
<local_schema short_desc="Laptop lid close action when on AC">
<longdesc>The action to take when the laptop lid is closed and the laptop is on AC power. Possible values are "suspend", "hibernate", "blank" and "nothing".</longdesc>
</local_schema>
</entry>
<entry name="action_button_power">
<local_schema short_desc="Power button action">
<longdesc>The action to take when the system power button is pressed. Possible values are "suspend", "hibernate", "interactive", "shutdown" and "nothing".</longdesc>
<longdesc>The action to take when the system hibernate button is pressed. Possible values are "suspend", "hibernate", "interactive", "shutdown" and "nothing".</longdesc>
</local_schema>
</entry>
<entry name="action_button_suspend">
<local_schema short_desc="Suspend button action">
<longdesc>The action to take when the system suspend button is pressed. Possible values are "suspend", "hibernate", "interactive", "shutdown" and "nothing".</longdesc>
</local_schema>
</entry>
<entry name="battery_dpms_sleep_method">
<local_schema short_desc="Method used to blank screen on battery">
<longdesc>The DPMS method used to blank the screen when on battery power. Possible values are "default", "standby", "suspend" and "off".</longdesc>
</local_schema>
</entry>
<entry name="battery_sleep_display">
<local_schema short_desc="Sleep timeout display when on battery">
<longdesc>The amount of time in seconds the computer on battery power needs to be inactive before the display goes to sleep.</longdesc>
</local_schema>
</entry>
<entry name="battery_sleep_computer">
<local_schema short_desc="Sleep timeout computer when on battery">
<longdesc>The amount of time in seconds the computer on battery power needs to be inactive before it goes to sleep.</longdesc>
</local_schema>
</entry>
<entry name="battery_brightness_kbd">
<local_schema short_desc="Keyboard brightness when on battery">
<longdesc>The brightness of the keyboard when on battery power. Possible values are between 0 and 100.</longdesc>
</local_schema>
</entry>
<entry name="battery_brightness">
<local_schema short_desc="LCD brightness when on battery">
<longdesc>The brightness of the display when on battery power. Possible values are between 0 and 100.</longdesc>
</local_schema>
</entry>
<entry name="ac_dpms_sleep_method">
<local_schema short_desc="Method used to blank screen on AC">
<longdesc>The DPMS method used to blank the screen when on AC power. Possible values are "default", "standby", "suspend" and "off".</longdesc>
</local_schema>
</entry>
<entry name="ac_sleep_display">
<local_schema short_desc="Sleep timeout display when on AC">
<longdesc>The amount of time in seconds before the display goes to sleep when the computer is on AC power.</longdesc>
</local_schema>
</entry>
<entry name="ac_sleep_computer">
<local_schema short_desc="Sleep timeout computer when on AC">
<longdesc>The amount of time in seconds the computer on AC power needs to be inactive before it goes to sleep.</longdesc>
</local_schema>
</entry>
<entry name="ac_brightness_kbd">
<local_schema short_desc="Keyboard brightness when on AC">
<longdesc>The brightness of the keyboard when on AC power. Possible values are between 0 and 100.</longdesc>
</local_schema>
</entry>
<entry name="ac_brightness">
<local_schema short_desc="LCD brightness when on AC">
<longdesc>The brightness of the display when on AC power. Possible values are between 0 and 100.</longdesc>
</local_schema>
</entry>
<entry name="display_icon_policy">
<local_schema short_desc="When to show the notification icon">
<longdesc>Display options for the notification icon. Valid options are "never", "critical", "charge", "present" and "always".</longdesc>
</local_schema>
</entry>
<entry name="notify_low_power">
<local_schema short_desc="Notify on a low power">
<longdesc>If a notification message should be displayed when the battery is getting low.</longdesc>
</local_schema>
</entry>
<entry name="notify_hal_error">
<local_schema short_desc="Notify on a HAL error">
<longdesc>If a notification message should be displayed after the suspend or hibernate failed.</longdesc>
</local_schema>
</entry>
<entry name="notify_fully_charged">
<local_schema short_desc="Notify when fully charged">
<longdesc>If a notification message should be displayed when the battery is fully charged.</longdesc>
</local_schema>
</entry>
<entry name="notify_ac_adapter">
<local_schema short_desc="Notify when AC adapter is disconnected">
<longdesc>If the user should be notified when the AC adapter is disconnected.</longdesc>
</local_schema>
</entry>
<entry name="can_hibernate">
<local_schema short_desc="Hibernate enabled">
<longdesc>If the user is authorized to hibernate the computer.</longdesc>
</local_schema>
</entry>
<entry name="can_suspend">
<local_schema short_desc="Suspend enabled">
<longdesc>If the user is authorized to suspend the computer.</longdesc>
</local_schema>
</entry>
<entry name="display_ambient">
<local_schema short_desc="Change the brightness to automatically using the ambient light sensors">
<longdesc>If the screen brightness should be changed automatically using the ambient light sensors.</longdesc>
</local_schema>
</entry>
<entry name="display_state_change">
<local_schema short_desc="Change the brightness to a preset level on AC state change">
<longdesc>If the screen brightness should be changed when switching between AC and battery power.</longdesc>
</local_schema>
</entry>
<entry name="battery_dim_on_idle">
<local_schema short_desc="Dim the screen after a period of inactivity when on battery power">
<longdesc>If the screen should be dimmed to save power when the computer is idle when on battery power.</longdesc>
</local_schema>
</entry>
<entry name="ac_dim_on_idle">
<local_schema short_desc="Dim the screen after a period of inactivity when on AC power">
<longdesc>If the screen should be dimmed to save power when the computer is idle when on AC power.</longdesc>
</local_schema>
</entry>
<entry name="check_type_cpu">
<local_schema short_desc="Check CPU load before sleeping">
<longdesc>If the CPU load should be checked before doing the idle action.</longdesc>
</local_schema>
</entry>
<entry name="use_time_for_policy">
<local_schema short_desc="Whether to use time-based notifications">
<longdesc>If time based notifications should be used. If set to false, then the percentage change is used instead, which may fix a broken ACPI BIOS.</longdesc>
</local_schema>
</entry>
<entry name="policy_suppression_timeout">
<local_schema short_desc="Number of seconds to suppress policy after resume">
<longdesc>After resume, gnome-power-manager will suppress policy actions for a number of seconds to allow messages to settle and HAL to refresh. Commonly five seconds is enough while not being so long that the user gets confused.</longdesc>
</local_schema>
</entry>
<entry name="show_actions_in_menu">
<local_schema short_desc="Allow Suspend and Hibernate in the menu">
<longdesc>If the Suspend and Hibernate options should be allowed in the notification area drop down menu.</longdesc>
</local_schema>
</entry>
<entry name="graph_data_max_time">
<local_schema short_desc="The maximum time displayed on the graph">
<longdesc>The maximum duration of time displayed on the x-axis of the graph.</longdesc>
</local_schema>
</entry>
<entry name="rate_exponential_average_factor">
<local_schema short_desc="The damping factor for the rate">
<longdesc>The value of the damping factor used when calculating the exponentially weighted average of the rate. Increasing this value will increase the damping effect of the rate calculations, which makes the time remaining more accurate, but the graphs less responsive.</longdesc>
</local_schema>
</entry>
<entry name="use_lowpower_battery">
<local_schema short_desc="If the low-power mode should be enabled when on battery">
<longdesc>If the system low-power mode should be enabled when on laptop battery power.</longdesc>
</local_schema>
</entry>
<entry name="use_lowpower_ups">
<local_schema short_desc="If the low-power mode should be enabled when on UPS">
<longdesc>If the system low-power mode should be enabled when on UPS power.</longdesc>
</local_schema>
</entry>
<entry name="use_lowpower_ac">
<local_schema short_desc="If the low-power mode should be enabled when on AC">
<longdesc>If the system low-power mode should be enabled when on AC power.</longdesc>
</local_schema>
</entry>
<entry name="battery_event_when_closed">
<local_schema short_desc="If the battery event should occur when the lid is shut and the power disconnected">
<longdesc>If the battery lid close event should occur (for example 'Suspend when lid closed on battery') when the lid is previously shut and the AC power disconnected at a later time.</longdesc>
</local_schema>
</entry>
<entry name="ignore_inhibit_requests">
<local_schema short_desc="If DBUS inhibit requests should be ignored.">
<longdesc>If DBUS inhibit requests should be ignored from other programs.</longdesc>
</local_schema>
</entry>
<entry name="invalid_timeout">
<local_schema short_desc="The invalid timeout for power actions">
<longdesc>The invalid timeout in ms for power actions. Set this longer if you get 'battery critical' messages when you unplug.</longdesc>
</local_schema>
</entry>
<entry name="enable_sounds">
<local_schema short_desc="If sounds should be used">
<longdesc>If sounds should be used when the power is critically low, or inhibit requests have stopped the policy action.</longdesc>
</local_schema>
</entry>
<entry name="cpufreq_battery_performance">
<local_schema short_desc="The cpufreq performance value to use when on battery power">
<longdesc>The cpufreq performance value to used to scale the processor when on battery power.</longdesc>
</local_schema>
</entry>
<entry name="cpufreq_battery_policy">
<local_schema short_desc="The cpufreq policy to use when on battery power">
<longdesc>The cpufreq policy to used to scale the processor when on battery power. Possible values are ondemand, conservative, powersave, userspace, performance, nothing.</longdesc>
</local_schema>
</entry>
<entry name="cpufreq_ac_performance">
<local_schema short_desc="The cpufreq performance value to use when on AC power">
<longdesc>The cpufreq performance value to used to scale the processor when on AC power.</longdesc>
</local_schema>
</entry>
<entry name="cpufreq_ac_policy">
<local_schema short_desc="The cpufreq policy to use when on AC power">
<longdesc>The cpufreq policy to used to scale the processor when on AC power. Possible values are ondemand, conservative, powersave, userspace, performance, nothing.</longdesc>
</local_schema>
</entry>
<entry name="cpufreq_consider_nice">
<local_schema short_desc="Whether or not niced processes should be considered on processor load calculation">
<longdesc>If niced processes are considered, they can cause a frequency increment even though their absolute load percentage wouldn't trigger the scaling mechanism to switch up the frequency.</longdesc>
</local_schema>
</entry>
<entry name="statistics_graph_type">
<local_schema short_desc="The default graph type to show in the statistics window">
<longdesc>The default graph type to show in the statistics window.</longdesc>
</local_schema>
</entry>
<entry name="statistics_show_events">
<local_schema short_desc="Whether we should show the events in the statistics window">
<longdesc>Whether we should show the events in the statistics window.</longdesc>
</local_schema>
</entry>
<entry name="statistics_show_legend">
<local_schema>
<longdesc>Whether we should show the legend in the statistics window.</longdesc>
</local_schema>
</entry>
<entry name="laptop_uses_external_monitor">
<local_schema>
<longdesc>If the laptop should be configured to not do dimming actions and DPMS off if it is using a dock or external monitor. Most laptop and desktop users should select FALSE here.</longdesc>
</local_schema>
</entry>
<entry name="show_recalled_battery_warning">
<local_schema short_desc="If we should show the recalled battery warning for a broken battery">
<longdesc>If we should show the recalled battery warning for a broken battery. Set this to false only if you know your battery is okay.</longdesc>
<longdesc>Override document restrictions, like restriction to copy or to print.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="eog">
<dir name="ui">
<entry name="info_collection">
<local_schema short_desc="Show/hide image information for collection.">
</local_schema>
</entry>
<entry name="info_image">
<local_schema short_desc="Show/hide image information for single image.">
</local_schema>
</entry>
<entry name="image_collection">
<local_schema short_desc="Show/hide the image collection pane.">
</local_schema>
</entry>
<entry name="statusbar">
<local_schema short_desc="Show/hide the window statusbar.">
</local_schema>
</entry>
<entry name="toolbar">
<local_schema short_desc="Show/hide the window toolbar.">
</local_schema>
</entry>
</dir>
<dir name="full_screen">
<entry name="seconds">
<local_schema short_desc="Delay in seconds until showing the next image">
<longdesc>A value greater than 0 determines the seconds an image stays on screen until the next one is shown automatically. Zero disables the automatic browsing.</longdesc>
</local_schema>
</entry>
<entry name="upscale">
<local_schema short_desc="Allow zoom greater than 100% initially">
<longdesc>If this is set to FALSE small images will not be stretched to fit into the screen initially.</longdesc>
</local_schema>
</entry>
<entry name="loop">
<local_schema short_desc="Loop through the image sequence">
<longdesc>Whether or not the sequence of images should be shown in an endless loop.</longdesc>
<longdesc>Determines how transparency should be indicated. Valid values are CHECK_PATTERN, COLOR and NONE. If COLOR is choosen, then the trans_color key determines the used color value.</longdesc>
</local_schema>
</entry>
<entry name="autorotate">
<local_schema short_desc="Automatic orientation">
<longdesc>Whether the image should be rotated automatically based on EXIF orientation.</longdesc>
</local_schema>
</entry>
<entry name="interpolate">
<local_schema short_desc="Interpolate Image">
<longdesc>Whether the image should be interpolated on zoom or not. This leads to better quality but is somewhat slower than non interpolated images.</longdesc>
<longdesc>If set to true, then Nautilus lets you edit and display file permissions in a more unix-like way, accessing some more esoteric options.</longdesc>
<local_schema short_desc="The type of text to display (if the text is enabled).">
<longdesc>A 0 value means to show cpu frequency, 1 to show frequency and units, and 2 to show percentage instead of frequency.</longdesc>
</local_schema>
</entry>
<entry name="show_mode">
<local_schema short_desc="Mode to show cpu usage">
<longdesc>A 0 value means to show the applet in graphic mode (pixmap only), 1 to show the applet in text mode (not to show the pixmap) and 2 to show the applet in graphic and text mode.</longdesc>
</local_schema>
</entry>
<entry name="cpu">
<local_schema short_desc="CPU to Monitor">
<longdesc>Set the CPU to monitor. In a single processor system you don't have to change it.</longdesc>
<longdesc>Notify user when the battery is low</longdesc>
</local_schema>
</entry>
<entry name="red_value_is_time">
<local_schema short_desc="Warn on low time rather than low percentage">
<longdesc>Use the value defined in red_value as a time remaining to show the warning dialog rather than a percentage</longdesc>
</local_schema>
</entry>
<entry name="red_value">
<local_schema short_desc="Red value level">
<longdesc>The battery level below which the battery is displayed as red. Also the value at which the low battery warning is displayed.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="gnome-terminal">
<dir name="keybindings">
<entry name="zoom_normal">
<local_schema short_desc="Keyboard shortcut to make font normal-size">
<longdesc>Keyboard shortcut key for making font the normal size. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="zoom_out">
<local_schema short_desc="Keyboard shortcut to make font smaller">
<longdesc>Keyboard shortcut key for making font smaller. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="zoom_in">
<local_schema short_desc="Keyboard shortcut to make font larger">
<longdesc>Keyboard shortcut key for making font larger. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="help">
<local_schema short_desc="Keyboard shortcut to launch help">
<longdesc>Keyboard shortcut key for launching help. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_12">
<local_schema short_desc="Keyboard shortcut to switch to tab 12">
<longdesc>Keyboard shortcut key for switch to tab 12. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_11">
<local_schema short_desc="Keyboard shortcut to switch to tab 11">
<longdesc>Keyboard shortcut key for switch to tab 11. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_10">
<local_schema short_desc="Keyboard shortcut to switch to tab 10">
<longdesc>Keyboard shortcut key for switch to tab 10. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_9">
<local_schema short_desc="Keyboard shortcut to switch to tab 9">
<longdesc>Keyboard shortcut key for switch to tab 9. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_8">
<local_schema short_desc="Keyboard shortcut to switch to tab 8">
<longdesc>Keyboard shortcut key for switch to tab 8. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_7">
<local_schema short_desc="Keyboard shortcut to switch to tab 7">
<longdesc>Keyboard shortcut key for switch to tab 7. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_6">
<local_schema short_desc="Keyboard shortcut to switch to tab 6">
<longdesc>Keyboard shortcut key for switch to tab 6. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_5">
<local_schema short_desc="Keyboard shortcut to switch to tab 5">
<longdesc>Keyboard shortcut key for switch to tab 5. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_4">
<local_schema short_desc="Keyboard shortcut to switch to tab 4">
<longdesc>Keyboard shortcut key for switch to tab 4. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_3">
<local_schema short_desc="Keyboard shortcut to switch to tab 3">
<longdesc>Keyboard shortcut key for switch to tab 3. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_2">
<local_schema short_desc="Keyboard shortcut to switch to tab 2">
<longdesc>Keyboard shortcut key for switch to tab 2. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="switch_to_tab_1">
<local_schema short_desc="Keyboard shortcut to switch to tab 1">
<longdesc>Keyboard shortcut key for switch to tab 1. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="detach_tab">
<local_schema short_desc="Accelerator to detach current tab.">
<longdesc>Accelerator key to detach current tab. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keybinding for this action."disabled", אזי לא יהיה מקש קיצור דרך לפעולה זו.</longdesc>
</local_schema>
</entry>
<entry name="move_tab_right">
<local_schema short_desc="Accelerator to move the current tab to the right.">
<longdesc>Accelerator key to move the current tab to the right. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keybinding for this action.</longdesc>
</local_schema>
</entry>
<entry name="move_tab_left">
<local_schema short_desc="Accelerator to move the current tab to the left.">
<longdesc>Accelerator key to move the current tab to the left. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keybinding for this action.</longdesc>
</local_schema>
</entry>
<entry name="next_tab">
<local_schema short_desc="Keyboard shortcut to switch to the next tab">
<longdesc>Keyboard shortcut key to switch to the next tab. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="prev_tab">
<local_schema short_desc="Keyboard shortcut to switch to the previous tab">
<longdesc>Keyboard shortcut key to switch to the previous tab. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="reset_and_clear">
<local_schema short_desc="Keyboard shortcut to reset and clear the terminal">
<longdesc>Keyboard shortcut key to reset and clear the terminal. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="reset">
<local_schema short_desc="Keyboard shortcut to reset the terminal">
<longdesc>Keyboard shortcut key to reset the terminal. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="set_terminal_title">
<local_schema short_desc="Keyboard shortcut to set the terminal title">
<longdesc>Keyboard shortcut key to set the terminal title. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="toggle_menubar">
<local_schema short_desc="Keyboard shortcut to toggle the visibility of the menubar">
<longdesc>Keyboard shortcut key to toggle the visibility of the menubar. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="full_screen">
<local_schema short_desc="Keyboard shortcut to toggle full screen mode">
<longdesc>Keyboard shortcut key for toggling full screen mode. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="paste">
<local_schema short_desc="Keyboard shortcut to paste text">
<longdesc>Keyboard shortcut key for pasting the contents of the clipboard into the terminal. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="copy">
<local_schema short_desc="Keyboard shortcut to copy text">
<longdesc>Keyboard shortcut key for copying selected text to the clipboard. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="close_window">
<local_schema short_desc="Keyboard shortcut to close a window">
<longdesc>Keyboard shortcut key for closing a window. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="close_tab">
<local_schema short_desc="Keyboard shortcut to close a tab">
<longdesc>Keyboard shortcut key for closing a tab. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="new_profile">
<local_schema short_desc="Keyboard shortcut to create a new profile">
<longdesc>Keyboard shortcut key for bringing up the dialog for profile creation. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="new_window">
<local_schema short_desc="Keyboard shortcut to open a new window">
<longdesc>Keyboard shortcut key for opening a new window. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
</local_schema>
</entry>
<entry name="new_tab">
<local_schema short_desc="Keyboard shortcut to open a new tab">
<longdesc>Keyboard shortcut key for opening a new tab. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.</longdesc>
<longdesc>Popup a dialog when an S/Key challenge response query is detected and clicked on. Typing a password into the dialog will send it to the terminal.</longdesc>
</local_schema>
</entry>
<entry name="use_system_font">
<local_schema short_desc="Whether to use the system font">
<longdesc>If true, the terminal will use the desktop-global standard font if it's monospace (and the most similar font it can come up with otherwise).</longdesc>
</local_schema>
</entry>
<entry name="no_aa_without_render">
<local_schema short_desc="Whether to disable anti-aliasing without the X RENDER extension">
<longdesc>If true, font anti-aliasing will be disabled when running without the X RENDER extension, which gives a considerable performance improvement in these situations.</longdesc>
</local_schema>
</entry>
<entry name="use_theme_colors">
<local_schema short_desc="Whether to use the colors from the theme for the terminal widget">
<longdesc>If true, the theme color scheme used for text entry boxes will be used for the terminal, instead of colors provided by the user.</longdesc>
</local_schema>
</entry>
<entry name="delete_binding">
<local_schema short_desc="Effect of the Delete key">
<longdesc>Sets what code the delete key generates. Possible values are "ascii-del" for the ASCII DEL character, "control-h" for Control-H (AKA the ASCII BS character), "escape-sequence" for the escape sequence typically bound to backspace or delete. "escape-sequence" is normally considered the correct setting for the Delete key.</longdesc>
</local_schema>
</entry>
<entry name="backspace_binding">
<local_schema short_desc="Effect of the Backspace key">
<longdesc>Sets what code the backspace key generates. Possible values are "ascii-del" for the ASCII DEL character, "control-h" for Control-H (AKA the ASCII BS character), "escape-sequence" for the escape sequence typically bound to backspace or delete. "ascii-del" is normally considered the correct setting for the Backspace key.</longdesc>
</local_schema>
</entry>
<entry name="background_darkness">
<local_schema short_desc="How much to darken the background image">
<longdesc>A value between 0.0 and 1.0 indicating how much to darken the background image. 0.0 means no darkness, 1.0 means fully dark. In the current implementation, there are only two levels of darkness possible, so the setting behaves as a boolean, where 0.0 disables the darkening effect.</longdesc>
</local_schema>
</entry>
<entry name="scroll_background">
<local_schema short_desc="Whether to scroll background image">
<longdesc>If true, scroll the background image with the foreground text; if false, keep the image in a fixed position and scroll the text above it.</longdesc>
</local_schema>
</entry>
<entry name="background_image">
<local_schema short_desc="Background image">
<longdesc>Filename of a background image.</longdesc>
</local_schema>
</entry>
<entry name="background_type">
<local_schema short_desc="Background type">
<longdesc>Type of terminal background. May be "solid" for a solid color, "image" for an image, or "transparent" for pseudo-transparency.</longdesc>
</local_schema>
</entry>
<entry name="font">
<local_schema short_desc="Font">
<longdesc>An Pango font name. Examples are "Sans 12" or "Monospace Bold 14".</longdesc>
</local_schema>
</entry>
<entry name="x_font">
<local_schema short_desc="Font">
<longdesc>An X font name. See the X man page (type "man X") for more details on the format of X font names.</longdesc>
</local_schema>
</entry>
<entry name="palette">
<local_schema short_desc="Palette for terminal applications">
<longdesc>Terminals have a 16-color palette that applications inside the terminal can use. This is that palette, in the form of a colon-separated list of color names. Color names should be in hex format e.g. "#FF00FF"</longdesc>
</local_schema>
</entry>
<entry name="icon">
<local_schema short_desc="Icon for terminal window">
<longdesc>Icon to use for tabs/windows containing this profile.</longdesc>
</local_schema>
</entry>
<entry name="custom_command">
<local_schema short_desc="Custom command to use instead of the shell">
<longdesc>Run this command in place of the shell, if use_custom_command is true.</longdesc>
</local_schema>
</entry>
<entry name="use_custom_command">
<local_schema short_desc="Whether to run a custom command instead of the shell">
<longdesc>If true, the value of the custom_command setting will be used in place of running a shell.</longdesc>
</local_schema>
</entry>
<entry name="update_records">
<local_schema short_desc="Whether to update login records when launching terminal command">
<longdesc>If true, the system login records utmp and wtmp will be updated when the command inside the terminal is launched.</longdesc>
</local_schema>
</entry>
<entry name="login_shell">
<local_schema short_desc="Whether to launch the command in the terminal as a login shell">
<longdesc>If true, the command inside the terminal will be launched as a login shell. (argv[0] will have a hyphen in front of it.)</longdesc>
</local_schema>
</entry>
<entry name="exit_action">
<local_schema short_desc="What to do with the terminal when the child command exits">
<longdesc>Possible values are "close" to close the terminal, and "restart" to restart the command.</longdesc>
</local_schema>
</entry>
<entry name="scroll_on_output">
<local_schema short_desc="Whether to scroll to the bottom when there's new output">
<longdesc>If true, whenever there's new output the terminal will scroll to the bottom.</longdesc>
</local_schema>
</entry>
<entry name="scroll_on_keystroke">
<local_schema short_desc="Whether to scroll to the bottom when a key is pressed">
<longdesc>If true, pressing a key jumps the scrollbar to the bottom.</longdesc>
</local_schema>
</entry>
<entry name="scrollback_lines">
<local_schema short_desc="Number of lines to keep in scrollback">
<longdesc>Number of scrollback lines to keep around. You can scroll back in the terminal by this number of lines; lines that don't fit in the scrollback are discarded. Be careful with this setting; it's the primary factor in determining how much memory the terminal will use.</longdesc>
<longdesc>Where to put the terminal scrollbar. Possibilities are "left", "right", and "disabled".</longdesc>
</local_schema>
</entry>
<entry name="word_chars">
<local_schema short_desc="Characters that are considered "part of a word"">
<longdesc>When selecting text by word, sequences of these characters are considered single words. Ranges can be given as "A-Z". Literal hyphen (not expressing a range) should be the first character given.</longdesc>
</local_schema>
</entry>
<entry name="silent_bell">
<local_schema short_desc="Whether to silence terminal bell">
<longdesc>If true, don't make a noise when applications send the escape sequence for the terminal bell.</longdesc>
</local_schema>
</entry>
<entry name="allow_bold">
<local_schema short_desc="Whether to allow bold text">
<longdesc>If true, allow applications in the terminal to make text boldface.</longdesc>
</local_schema>
</entry>
<entry name="title">
<local_schema short_desc="Title for terminal">
</local_schema>
</entry>
<entry name="title_mode">
<local_schema short_desc="What to do with dynamic title">
<longdesc>If the application in the terminal sets the title (most typically people have their shell set up to do this), the dynamically-set title can erase the configured title, go before it, go after it, or replace it. The possible values are "replace", "before", "after", and "ignore".</longdesc>
</local_schema>
</entry>
<entry name="background_color">
<local_schema short_desc="Default color of terminal background">
<longdesc>Default color of terminal background, as a color specification (can be HTML-style hex digits, or a color name such as "red").</longdesc>
</local_schema>
</entry>
<entry name="foreground_color">
<local_schema short_desc="Default color of text in the terminal">
<longdesc>Default color of text in the terminal, as a color specification (can be HTML-style hex digits, or a color name such as "red").</longdesc>
</local_schema>
</entry>
<entry name="default_show_menubar">
<local_schema short_desc="Whether to show menubar in new windows/tabs">
<longdesc>True if the menubar should be shown in new windows, for windows/tabs with this profile.</longdesc>
</local_schema>
</entry>
<entry name="cursor_blink">
<local_schema short_desc="Whether to blink the cursor">
<longdesc>True if the cursor should blink when the terminal has focus, for windows/tabs with this profile.</longdesc>
</local_schema>
</entry>
<entry name="visible_name">
<local_schema short_desc="Human-readable name of the profile">
</local_schema>
</entry>
</dir>
</dir>
<dir name="global">
<entry name="confirm_window_close">
<local_schema short_desc="Whether to ask for confirmation when closing terminal windows">
<longdesc>Whether to ask for confirmation when closing a terminal window which has more than one open tab.</longdesc>
</local_schema>
</entry>
<entry name="active_encodings">
<local_schema short_desc="List of available encodings">
</local_schema>
</entry>
<entry name="use_menu_accelerators">
<local_schema short_desc="Whether the standard GTK shortcut for menubar access is enabled">
<longdesc>Normally you can access the menubar with F10. This can also be customized via gtkrc (gtk-menu-bar-accel = "whatever"). This option allows the standard menubar accelerator to be disabled.</longdesc>
</local_schema>
</entry>
<entry name="use_mnemonics">
<local_schema short_desc="Whether the menubar has access keys">
<longdesc>Whether to have Alt+letter access keys for the menubar. They may interfere with some applications run inside the terminal so it's possible to turn them off.</longdesc>
</local_schema>
</entry>
<entry name="default_profile">
<local_schema short_desc="Profile to use for new terminals">
<longdesc>Profile to be used when opening a new window or tab. Must be in profile_list.</longdesc>
</local_schema>
</entry>
<entry name="profile_list">
<local_schema short_desc="List of profiles">
<longdesc>List of profiles known to gnome-terminal. The list contains strings naming subdirectories relative to /apps/gnome-terminal/profiles.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="metacity">
<dir name="keybinding_commands">
<entry name="command">
<local_schema short_desc="Commands to run in response to keybindings">
<longdesc>The /apps/metacity/global_keybindings/run_command_N keys define keybindings that correspond to these commands. Pressing the keybinding for run_command_N will execute command_N.</longdesc>
<longdesc>The /apps/metacity/global_keybindings/run_command_window_screenshot key defines a keybinding which causes the command specified by this setting to be invoked.</longdesc>
<longdesc>The /apps/metacity/global_keybindings/run_command_screenshot key defines a keybinding which causes the command specified by this setting to be invoked.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="global_keybindings">
<entry name="run_command">
<local_schema short_desc="Run a defined command">
</local_schema>
</entry>
<entry name="run_command_terminal">
<local_schema short_desc="Run a terminal">
</local_schema>
</entry>
<entry name="run_command_window_screenshot">
<local_schema short_desc="Take a screenshot of a window">
</local_schema>
</entry>
<entry name="run_command_screenshot">
<local_schema short_desc="Take a screenshot">
</local_schema>
</entry>
<entry name="panel_run_dialog">
<local_schema short_desc="Show the panel run application dialog">
</local_schema>
</entry>
<entry name="panel_main_menu">
<local_schema short_desc="Show the panel menu">
</local_schema>
</entry>
<entry name="switch_to_workspace_down">
<local_schema short_desc="Switch to workspace below this one">
</local_schema>
</entry>
<entry name="switch_to_workspace_up">
<local_schema short_desc="Switch to workspace above this one">
</local_schema>
</entry>
<entry name="switch_to_workspace_right">
<local_schema short_desc="Switch to workspace on the right">
</local_schema>
</entry>
<entry name="switch_to_workspace_left">
<local_schema short_desc="Switch to workspace on the left">
</local_schema>
</entry>
<entry name="switch_to_workspace_12">
<local_schema short_desc="Switch to workspace 12">
</local_schema>
</entry>
<entry name="switch_to_workspace_11">
<local_schema short_desc="Switch to workspace 11">
</local_schema>
</entry>
<entry name="switch_to_workspace_10">
<local_schema short_desc="Switch to workspace 10">
</local_schema>
</entry>
<entry name="switch_to_workspace_9">
<local_schema short_desc="Switch to workspace 9">
</local_schema>
</entry>
<entry name="switch_to_workspace_8">
<local_schema short_desc="Switch to workspace 8">
</local_schema>
</entry>
<entry name="switch_to_workspace_7">
<local_schema short_desc="Switch to workspace 7">
</local_schema>
</entry>
<entry name="switch_to_workspace_6">
<local_schema short_desc="Switch to workspace 6">
</local_schema>
</entry>
<entry name="switch_to_workspace_5">
<local_schema short_desc="Switch to workspace 5">
</local_schema>
</entry>
<entry name="switch_to_workspace_4">
<local_schema short_desc="Switch to workspace 4">
</local_schema>
</entry>
<entry name="switch_to_workspace_3">
<local_schema short_desc="Switch to workspace 3">
</local_schema>
</entry>
<entry name="switch_to_workspace_2">
<local_schema short_desc="Switch to workspace 2">
</local_schema>
</entry>
<entry name="switch_to_workspace_1">
<local_schema short_desc="Switch to workspace 1">
</local_schema>
</entry>
<entry name="show_desktop">
<local_schema short_desc="Hide all windows and focus desktop">
</local_schema>
</entry>
<entry name="cycle_panels_backward">
<local_schema short_desc="Move backward between panels and the desktop immediately">
</local_schema>
</entry>
<entry name="cycle_panels">
<local_schema short_desc="Move between panels and the desktop immediately">
</local_schema>
</entry>
<entry name="cycle_windows_backward">
<local_schema short_desc="Move backwards between windows immediately">
</local_schema>
</entry>
<entry name="cycle_windows">
<local_schema short_desc="Move between windows immediately">
</local_schema>
</entry>
<entry name="switch_group_backward">
<local_schema short_desc="Move backwards between windows of an application with popup">
</local_schema>
</entry>
<entry name="switch_group">
<local_schema short_desc="Move between windows of an application with popup">
</local_schema>
</entry>
<entry name="cycle_group_backward">
<local_schema short_desc="Move backwards between windows of an application immediately">
</local_schema>
</entry>
<entry name="cycle_group">
<local_schema short_desc="Move between windows of an application immediately">
</local_schema>
</entry>
<entry name="switch_panels_backward">
<local_schema short_desc="Move backwards between panels and the desktop with popup">
</local_schema>
</entry>
<entry name="switch_panels">
<local_schema short_desc="Move between panels and the desktop with popup">
</local_schema>
</entry>
<entry name="switch_windows_backward">
<local_schema short_desc="Move focus backwards between windows using popup display">
</local_schema>
</entry>
<entry name="switch_windows">
<local_schema short_desc="Move between windows with popup">
<local_schema short_desc="Disable misfeatures that are required by old or broken applications">
<longdesc>Some applications disregard specifications in ways that result in window manager misfeatures. This option puts Metacity in a rigorously correct mode, which gives a more consistent user interface, provided one does not need to run any misbehaving applications.</longdesc>
</local_schema>
</entry>
<entry name="application_based">
<local_schema short_desc="(Not implemented) Navigation works in terms of applications not windows">
<longdesc>If true, then Metacity works in terms of applications rather than windows. The concept is a bit abstract, but in general an application-based setup is more like the Mac and less like Windows. When you focus a window in application-based mode, all the windows in the application will be raised. Also, in application-based mode, focus clicks are not passed through to windows in other applications. Application-based mode is, however, largely unimplemented at the moment.</longdesc>
</local_schema>
</entry>
<entry name="reduced_resources">
<local_schema short_desc="If true, trade off usability for less resource usage">
<longdesc>If true, metacity will give the user less feedback by using wireframes, avoiding animations, or other means. This is a significant reduction in usability for many users, but may allow legacy applications to continue working, and may also be a useful tradeoff for terminal servers. However, the wireframe feature is disabled when accessibility is on.</longdesc>
</local_schema>
</entry>
<entry name="compositing_manager">
<local_schema short_desc="Compositing Manager">
<longdesc>Determines whether Metacity is a compositing manager.</longdesc>
</local_schema>
</entry>
<entry name="visual_bell_type">
<local_schema short_desc="Visual Bell Type">
<longdesc>Tells Metacity how to implement the visual indication that the system bell or another application 'bell' indicator has been rung. Currently there are two valid values, "fullscreen", which causes a fullscreen white-black flash, and "frame_flash" which causes the titlebar of the application which sent the bell signal to flash. If the application which sent the bell is unknown (as is usually the case for the default "system beep"), the currently focused window's titlebar is flashed.</longdesc>
</local_schema>
</entry>
<entry name="audible_bell">
<local_schema short_desc="System Bell is Audible">
<longdesc>Determines whether applications or the system can generate audible 'beeps'; may be used in conjunction with 'visual bell' to allow silent 'beeps'.</longdesc>
</local_schema>
</entry>
<entry name="visual_bell">
<local_schema short_desc="Enable Visual Bell">
<longdesc>Turns on a visual indication when an application or the system issues a 'bell' or 'beep'; useful for the hard-of-hearing and for use in noisy environments.</longdesc>
</local_schema>
</entry>
<entry name="num_workspaces">
<local_schema short_desc="Number of workspaces">
<longdesc>Number of workspaces. Must be more than zero, and has a fixed maximum to prevent making the desktop unusable by accidentally asking for too many workspaces.</longdesc>
</local_schema>
</entry>
<entry name="titlebar_font">
<local_schema short_desc="Window title font">
<longdesc>A font description string describing a font for window titlebars. The size from the description will only be used if the titlebar_font_size option is set to 0. Also, this option is disabled if the titlebar_uses_desktop_font option is set to true.</longdesc>
</local_schema>
</entry>
<entry name="titlebar_uses_system_font">
<local_schema short_desc="Use standard system font in window titles">
<longdesc>If true, ignore the titlebar_font option, and use the standard application font for window titles.</longdesc>
</local_schema>
</entry>
<entry name="theme">
<local_schema short_desc="Current theme">
<longdesc>The theme determines the appearance of window borders, titlebar, and so forth.</longdesc>
</local_schema>
</entry>
<entry name="auto_raise_delay">
<local_schema short_desc="Delay in milliseconds for the auto raise option">
<longdesc>The time delay before raising a window if auto_raise is set to true. The delay is given in thousandths of a second.</longdesc>
</local_schema>
</entry>
<entry name="auto_raise">
<local_schema short_desc="Automatically raises the focused window">
<longdesc>If set to true, and the focus mode is either "sloppy" or "mouse" then the focused window will be automatically raised after a delay specified by the auto_raise_delay key. This is not related to clicking on a window to raise it, nor to entering a window during drag-and-drop.</longdesc>
</local_schema>
</entry>
<entry name="action_double_click_titlebar">
<local_schema short_desc="Action on title bar double-click">
<longdesc>This option determines the effects of double-clicking on the title bar. Current valid options are 'toggle_shade', which will shade/unshade the window, 'toggle_maximize' which will maximize/unmaximize the window, 'minimize' which will minimize the window, and 'none' which will not do anything.</longdesc>
</local_schema>
</entry>
<entry name="raise_on_click">
<local_schema short_desc="Whether raising should be a side-effect of other user interactions">
<longdesc>Many actions (e.g. clicking in the client area, moving or resizing the window) normally raise the window as a side-effect. Set this option to false to decouple raising from other user actions. Even when this option is false, windows can still be raised by an alt-left-click anywhere on the window, a normal click on the window decorations, or by special messages, such as activation requests from pagers. This option is currently disabled in click-to-focus mode.</longdesc>
</local_schema>
</entry>
<entry name="focus_new_windows">
<local_schema short_desc="Control how new windows get focus">
<longdesc>This option provides additional control over how newly created windows get focus. It has two possible values; "smart" applies the user's normal focus mode, and "strict" results in windows started from a terminal not being given focus.</longdesc>
</local_schema>
</entry>
<entry name="focus_mode">
<local_schema short_desc="Window focus mode">
<longdesc>The window focus mode indicates how windows are activated. It has three possible values; "click" means windows must be clicked in order to focus them, "sloppy" means windows are focused when the mouse enters the window, and "mouse" means windows are focused when the mouse enters the window and unfocused when the mouse leaves the window.</longdesc>
</local_schema>
</entry>
<entry name="button_layout">
<local_schema short_desc="Arrangement of buttons on the titlebar">
<longdesc>Arrangement of buttons on the titlebar. The value should be a string, such as "menu:minimize,maximize,close"; the colon separates the left corner of the window from the right corner, and the button names are comma-separated. Duplicate buttons are not allowed. Unknown button names are silently ignored so that buttons can be added in future metacity versions without breaking older versions.</longdesc>
</local_schema>
</entry>
<entry name="mouse_button_modifier">
<local_schema short_desc="Modifier to use for modified window click actions">
</local_schema>
</entry>
</dir>
</dir>
<dir name="gnome-volume-control">
<dir name="ui">
<entry name="window_width">
<local_schema short_desc="Width of the Window">
<longdesc>Width of the Window to be displayed</longdesc>
</local_schema>
</entry>
<entry name="window_height">
<local_schema short_desc="Height of the Window">
<longdesc>Height of the Window to be displayed</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="gnome-cd">
<entry name="volume">
<local_schema short_desc="CD player Volume">
<longdesc>What volume should the CD player use when it is started?</longdesc>
</local_schema>
</entry>
<entry name="theme-name">
<local_schema short_desc="CD player theme">
<longdesc>What theme should the CD player use for its appearance</longdesc>
</local_schema>
</entry>
<entry name="show-remaining-time">
<local_schema short_desc="Display the Remaining time?">
<longdesc>How the time should be displayed while CD Player is playing?</longdesc>
</local_schema>
</entry>
<entry name="on-stop-eject">
<local_schema short_desc="Eject the CD when CD player quits?">
<longdesc>Should the CD be ejected when the CD player quits?</longdesc>
</local_schema>
</entry>
<entry name="on-start-play">
<local_schema short_desc="Play when the CD player starts?">
<longdesc>When the CD player is started, should it start playing the CD?</longdesc>
</local_schema>
</entry>
<entry name="device">
<local_schema short_desc="Device path">
<longdesc>The path to the CD drive that the CD player should use to play CDs</longdesc>
</local_schema>
</entry>
</dir>
<dir name="CDDB-Slave2">
<entry name="hostname">
<local_schema short_desc="Your hostname">
<longdesc>The hostname that will be sent with all queries</longdesc>
</local_schema>
</entry>
<entry name="name">
<local_schema short_desc="The username">
<longdesc>The username that will be sent with all queries</longdesc>
</local_schema>
</entry>
<entry name="info">
<local_schema short_desc="Information to send to server">
<longdesc>This key specifies which user information will be sent to the server to contact for CD queries. Possible values are 0 (no information), 1 (real information) and 3 (other information).</longdesc>
</local_schema>
</entry>
<entry name="server-type">
<local_schema short_desc="Server type">
<longdesc>The type of the server to contact for CD queries. Possible values are 0 (FreeDB round robin server), 1 (other freedb server) and 2 (other server).</longdesc>
</local_schema>
</entry>
<entry name="port">
<local_schema short_desc="Port">
<longdesc>The port that the server is running the database on</longdesc>
</local_schema>
</entry>
<entry name="server">
<local_schema short_desc="Server name">
<longdesc>Address of the server to contact for CD queries</longdesc>
<longdesc>A partial GStreamer pipeline to use for this profile.</longdesc>
</local_schema>
</entry>
<entry name="description">
<local_schema short_desc="A description for the audio profile">
</local_schema>
</entry>
<entry name="name">
<local_schema short_desc="A short name for the audio profile">
</local_schema>
</entry>
</dir>
</dir>
<dir name="global">
<entry name="profile_list">
<local_schema short_desc="List of profiles">
</local_schema>
</entry>
</dir>
</dir>
</dir>
</dir>
<dir name="smb">
<entry name="workgroup">
<local_schema short_desc="SMB workgroup">
<longdesc>The Windows networking workgroup or domain that the user is part of. In order for a new workgroup to fully take effect the user may need to log out and log back in.</longdesc>
<longdesc>Select the proxy configuration mode. Supported values are "none", "manual", "auto".</longdesc>
</local_schema>
</entry>
</dir>
<dir name="http_proxy">
<entry name="ignore_hosts">
<local_schema short_desc="Non-proxy hosts">
<longdesc>This key contains a list of hosts which are connected to directly, rather than via the proxy (if it is active). The values can be hostnames, domains (using an initial wildcard like *.foo.com), IP host addresses (both IPv4 and IPv6) and network addresses with a netmask (something like 192.168.0.0/24).</longdesc>
</local_schema>
</entry>
<entry name="authentication_password">
<local_schema short_desc="HTTP proxy password">
<longdesc>Password to pass as authentication when doing HTTP proxying.</longdesc>
</local_schema>
</entry>
<entry name="authentication_user">
<local_schema short_desc="HTTP proxy username">
<longdesc>User name to pass as authentication when doing HTTP proxying.</longdesc>
</local_schema>
</entry>
<entry name="use_authentication">
<local_schema short_desc="Authenticate proxy server connections">
<longdesc>If true, then connections to the proxy server require authentication. The username/password combo is defined by "/system/http_proxy/authentication_user" and "/system/http_proxy/authentication_password".</longdesc>
</local_schema>
</entry>
<entry name="port">
<local_schema short_desc="HTTP proxy port">
<longdesc>The port on the machine defined by "/system/http_proxy/host" that you proxy through.</longdesc>
</local_schema>
</entry>
<entry name="host">
<local_schema short_desc="HTTP proxy host name">
<longdesc>The machine name to proxy HTTP through.</longdesc>
</local_schema>
</entry>
<entry name="use_http_proxy">
<local_schema short_desc="Use HTTP proxy">
<longdesc>Enables the proxy settings when accessing HTTP over the Internet.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="dns_sd">
<entry name="extra_domains">
<local_schema short_desc="Extra domains to look for DNS-SD services in">
<longdesc>Comma separated list of DNS-SD domains that should be visible in the "network:///" location.</longdesc>
</local_schema>
</entry>
<entry name="display_local">
<local_schema short_desc="How to display local DNS-SD service">
<longdesc>Possible values are "merged", "separate" and "disabled".</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="desktop">
<dir name="gnome">
<dir name="remote_access">
<entry name="mailto">
<local_schema short_desc="E-mail address to which the remote desktop URL should be sent">
<longdesc>This key specifies the e-mail address to which the remote desktop URL should be sent if the user clicks on the URL in the Remote Desktop preferences dialog.</longdesc>
</local_schema>
</entry>
<entry name="vnc_password">
<local_schema short_desc="Password required for "vnc" authentication">
<longdesc>The password which the remote user will be prompted for if the "vnc" authentication method is used. The password specified by the key is base64 encoded.</longdesc>
<longdesc>Lists the authentication methods with which remote users may access the desktop. There are two possible authentication methods; "vnc" causes the remote user to be prompted for a password (the password is specified by the vnc_password key) before connecting and "none" which allows any remote user to connect.</longdesc>
</local_schema>
</entry>
<entry name="require_encryption">
<local_schema short_desc="Require encryption">
<longdesc>If true, remote users accessing the desktop are required to be able support encryption. It is highly recommended that you use a client which supports encryption unless the intervening network is trusted.</longdesc>
</local_schema>
</entry>
<entry name="alternative_port">
<local_schema short_desc="Alternative port number">
<longdesc>The port which the server will listen to if the 'use_alternative_port' key is set to true. Valid values are in the range from 5000 to 50000.</longdesc>
</local_schema>
</entry>
<entry name="use_alternative_port">
<local_schema short_desc="Listen an alternative port">
<longdesc>If true, the server will listen another port, instead of default (5900). The port must be specified in 'alternative_port' key.</longdesc>
</local_schema>
</entry>
<entry name="local_only">
<local_schema short_desc="Only allow local connections">
<longdesc>If true, the server will only accept connections from localhost and network connections will be rejected. Set this option to true if you wish to exclusively use a tunneling mechanism to access the server, such as ssh.</longdesc>
</local_schema>
</entry>
<entry name="view_only">
<local_schema short_desc="Only allow remote users to view the desktop">
<longdesc>If true, remote users accessing the desktop are only allowed to view the desktop. Remote user's will not be able to use the mouse or keyboard.</longdesc>
</local_schema>
</entry>
<entry name="prompt_enabled">
<local_schema short_desc="Prompt the user before completing a connection">
<longdesc>If true, remote users accessing the desktop are not allowed access until the user on the host machine approves the connection. Recommended especially when access is not password protected.</longdesc>
<longdesc>If true, allows remote access to the desktop via the RFB protocol. Users on remote machines may then connect to the desktop using a vncviewer.</longdesc>
<local_schema short_desc="Whether or not keyboard locking is enabled">
<longdesc>Whether or not keyboard locking is enabled.</longdesc>
</local_schema>
</entry>
<entry name="allow_postpone">
<local_schema short_desc="Allow postponing of breaks">
<longdesc>Whether or not the typing break screen can be postponed.</longdesc>
</local_schema>
</entry>
<entry name="break_time">
<local_schema short_desc="Break time">
<longdesc>Number of minutes that the typing break should last.</longdesc>
</local_schema>
</entry>
<entry name="type_time">
<local_schema short_desc="Type time">
<longdesc>Number of minutes of typing time before break mode starts.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="thumbnailers">
<entry name="disable_all">
<local_schema short_desc="Disable all external thumbnailers">
<longdesc>Set to true to disable all external thumbnailer programs, independent on whether they are independently disabled/enabled.</longdesc>
</local_schema>
</entry>
<dir name="application@x-gzpdf">
<entry name="command">
<local_schema short_desc="Thumbnail command for PDF Documents">
<longdesc>Valid command plus arguments for the PDF Document thumbnailer. See nautilus thumbnailer documentation for more information.</longdesc>
</local_schema>
</entry>
<entry name="enable">
<local_schema short_desc="Enable thumbnailing of PDF Documents">
<longdesc>Boolean options available, true enables thumbnailing and false disables the creation of new thumbnails</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@x-bzpdf">
<entry name="command">
<local_schema short_desc="Thumbnail command for PDF Documents">
<longdesc>Valid command plus arguments for the PDF Document thumbnailer. See nautilus thumbnailer documentation for more information.</longdesc>
</local_schema>
</entry>
<entry name="enable">
<local_schema short_desc="Enable thumbnailing of PDF Documents">
<longdesc>Boolean options available, true enables thumbnailing and false disables the creation of new thumbnails</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@pdf">
<entry name="command">
<local_schema short_desc="Thumbnail command for PDF Documents">
<longdesc>Valid command plus arguments for the PDF Document thumbnailer. See nautilus thumbnailer documentation for more information.</longdesc>
</local_schema>
</entry>
<entry name="enable">
<local_schema short_desc="Enable thumbnailing of PDF Documents">
<longdesc>Boolean options available, true enables thumbnailing and false disables the creation of new thumbnails</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@x-gnome-theme">
<entry name="enable">
<local_schema short_desc="Whether to thumbnail themes">
<longdesc>If set to true, then themes will be thumbnailed.</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="Thumbnail command for themes">
<longdesc>Set this key to the command used to create thumbnails for themes.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@x-gnome-theme-installed">
<entry name="enable">
<local_schema short_desc="Whether to thumbnail installed themes">
<longdesc>If set to true, then installed themes will be thumbnailed.</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="Thumbnail command for installed themes">
<longdesc>Set this key to the command used to create thumbnails for installed themes.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@x-font-otf">
<entry name="enable">
<local_schema short_desc="Whether to thumbnail OpenType fonts">
<longdesc>If set to true, then OpenType fonts will be thumbnailed.</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="Thumbnail command for OpenType fonts">
<longdesc>Set this key to the command used to create thumbnails for OpenType fonts.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@x-font-pcf">
<entry name="enable">
<local_schema short_desc="Whether to thumbnail PCF fonts">
<longdesc>If set to true, then PCF fonts will be thumbnailed.</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="Thumbnail command for PCF fonts">
<longdesc>Set this key to the command used to create thumbnails for PCF fonts.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@x-font-type1">
<entry name="enable">
<local_schema short_desc="Whether to thumbnail Type1 fonts">
<longdesc>If set to true, then Type1 fonts will be thumbnailed.</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="Thumbnail command for Type1 fonts">
<longdesc>Set this key to the command used to create thumbnails for Type1 fonts.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="application@x-font-ttf">
<entry name="enable">
<local_schema short_desc="Whether to thumbnail TrueType fonts">
<longdesc>If set to true, then TrueType fonts will be thumbnailed.</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="Thumbnail command for TrueType fonts">
<longdesc>Set this key to the command used to create thumbnails for TrueType fonts.</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="sound">
<entry name="event_sounds">
<local_schema short_desc="Sounds for events">
<longdesc>Whether to play sounds on user events.</longdesc>
</local_schema>
</entry>
<entry name="enable_esd">
<local_schema short_desc="Enable ESD">
<longdesc>Enable sound server startup.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="peripherals">
<dir name="mouse">
<entry name="cursor_size">
<local_schema short_desc="Cursor size">
<longdesc>Size of the cursor referenced by cursor_theme.</longdesc>
</local_schema>
</entry>
<entry name="cursor_theme">
<local_schema short_desc="Cursor theme">
<longdesc>Cursor theme name. Used only by Xservers that support Xcursor, such as XFree86 4.3 and later.</longdesc>
</local_schema>
</entry>
<entry name="cursor_font">
<local_schema short_desc="Cursor font">
<longdesc>Font name of the cursor. If unset, the default font is used. This value is only propagated to the X server start of each session, so changing it mid-session won't have an effect until the next time you log in.</longdesc>
</local_schema>
</entry>
<entry name="locate_pointer">
<local_schema short_desc="Locate Pointer">
<longdesc>Highlights the current location of the pointer when the Control key is pressed and released</longdesc>
</local_schema>
</entry>
<entry name="double_click">
<local_schema short_desc="Double Click Time">
<longdesc>Length of a double click</longdesc>
</local_schema>
</entry>
<entry name="drag_threshold">
<local_schema short_desc="Drag Threshold">
<longdesc>Distance before a drag is started</longdesc>
</local_schema>
</entry>
<entry name="motion_threshold">
<local_schema short_desc="Motion Threshold">
<longdesc>Distance in pixels the pointer must move before accelerated mouse motion is activated. A value of -1 is the system default.</longdesc>
</local_schema>
</entry>
<entry name="motion_acceleration">
<local_schema short_desc="Single Click">
<longdesc>Acceleration multiplier for mouse motion. A value of -1 is the system default.</longdesc>
<longdesc>When set to true, GNOME will remember the state of the NumLock LED between sessions.</longdesc>
</local_schema>
</entry>
<entry name="bell_custom_file">
<local_schema short_desc="Keyboard Bell Custom Filename">
<longdesc>File name of the bell sound to be played</longdesc>
</local_schema>
</entry>
<entry name="bell_mode">
<local_schema>
<longdesc>possible values are "on", "off", and "custom".</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="lockdown">
<entry name="disable_print_setup">
<local_schema short_desc="Disable print setup">
<longdesc>Prevent the user from modifying print settings. For example, this would disable access to all applications' "Print Setup" dialogs.</longdesc>
</local_schema>
</entry>
<entry name="disable_printing">
<local_schema short_desc="Disable printing">
<longdesc>Prevent the user from printing. For example, this would disable access to all applications' "Print" dialogs.</longdesc>
</local_schema>
</entry>
<entry name="disable_save_to_disk">
<local_schema short_desc="Disable saving files to disk">
<longdesc>Prevent the user from saving files to disk. For example, this would disable access to all applications' "Save as" dialogs.</longdesc>
</local_schema>
</entry>
<entry name="disable_command_line">
<local_schema short_desc="Disable command line">
<longdesc>Prevent the user from accessing the terminal or specifying a command line to be executed. For example, this would disable access to the panel's "Run Application" dialog.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="interface">
<entry name="show_unicode_menu">
<local_schema short_desc="Show the 'Unicode Control Character' menu">
<longdesc>Whether the context menus of entries and text views should offer to insert control characters</longdesc>
</local_schema>
</entry>
<entry name="show_input_method_menu">
<local_schema short_desc="Show the 'Input Methods' menu">
<longdesc>Whether the context menus of entries and text views should offer to change the input method</longdesc>
</local_schema>
</entry>
<entry name="menubar_accel">
<local_schema short_desc="Menubar accelerator">
<longdesc>Keyboard shortcut to open the menu bars.</longdesc>
</local_schema>
</entry>
<entry name="file_chooser_backend">
<local_schema short_desc="Module for GtkFileChooser">
<longdesc>Module to use as the filesystem model for the GtkFileChooser widget. Possible values are "gnome-vfs" and "gtk+".</longdesc>
</local_schema>
</entry>
<entry name="status_bar_meter_on_right">
<local_schema short_desc="Status Bar on Right">
<longdesc>Whether to display a status bar meter on the right</longdesc>
</local_schema>
</entry>
<entry name="use_custom_font">
<local_schema short_desc="Use Custom Font">
<longdesc>Whether to use a custom font in gtk+ applications.</longdesc>
</local_schema>
</entry>
<entry name="monospace_font_name">
<local_schema short_desc="Monospace font">
<longdesc>Name of a monospaced (fixed-width) font for use in locations like terminals.</longdesc>
</local_schema>
</entry>
<entry name="document_font_name">
<local_schema short_desc="Document font">
<longdesc>Name of the default font used for reading documents</longdesc>
</local_schema>
</entry>
<entry name="gtk-im-status-style">
<local_schema short_desc="GTK IM Status Style">
<longdesc>Name of the GTK+ input method Status Style used by gtk+.</longdesc>
</local_schema>
</entry>
<entry name="gtk-im-preedit-style">
<local_schema short_desc="GTK IM Preedit Style">
<longdesc>Name of the GTK+ input method Preedit Style used by gtk+.</longdesc>
</local_schema>
</entry>
<entry name="font_name">
<local_schema short_desc="Default font">
<longdesc>Name of the default font used by gtk+.</longdesc>
</local_schema>
</entry>
<entry name="gtk_key_theme">
<local_schema short_desc="Gtk+ Theme">
<longdesc>Basename of the default theme used by gtk+.</longdesc>
</local_schema>
</entry>
<entry name="gtk_theme">
<local_schema short_desc="Gtk+ Theme">
<longdesc>Basename of the default theme used by gtk+.</longdesc>
</local_schema>
</entry>
<entry name="icon_theme">
<local_schema short_desc="Icon Theme">
<longdesc>Icon theme to use for the panel, nautilus etc.</longdesc>
</local_schema>
</entry>
<entry name="cursor_blink_time">
<local_schema short_desc="Cursor Blink Time">
<longdesc>Length of the cursor blink cycle, in milliseconds</longdesc>
</local_schema>
</entry>
<entry name="cursor_blink">
<local_schema short_desc="Cursor Blink">
<longdesc>Whether the cursor should blink</longdesc>
</local_schema>
</entry>
<entry name="toolbar_icon_size">
<local_schema short_desc="Toolbar Icon Size">
<longdesc>This specifies the size of icons displayed in toolbars</longdesc>
</local_schema>
</entry>
<entry name="toolbar_detachable">
<local_schema short_desc="Toolbar Detachable">
<longdesc>Whether the user can detach toolbars and move them around</longdesc>
</local_schema>
</entry>
<entry name="menubar_detachable">
<local_schema short_desc="Menubar Detachable">
<longdesc>Whether the user can detach menubars and move them around</longdesc>
</local_schema>
</entry>
<entry name="menus_have_icons">
<local_schema short_desc="Menus Have Icons">
<longdesc>Whether menus may display an icon next to a menu entry</longdesc>
</local_schema>
</entry>
<entry name="toolbar_style">
<local_schema short_desc="Toolbar Style">
<longdesc>Toolbar Style. Valid values are "both", "both-horiz", "icons", and "text"</longdesc>
</local_schema>
</entry>
<entry name="can_change_accels">
<local_schema short_desc="Can Change Accels">
<longdesc>Whether the user can dynamically type a new accelerator when positioned over an active menuitem</longdesc>
</local_schema>
</entry>
<entry name="menus_have_tearoff">
<local_schema short_desc="Menus Have Tearoff">
<longdesc>Whether menus should have a tearoff</longdesc>
</local_schema>
</entry>
<entry name="enable_animations">
<local_schema short_desc="Enable Animations">
<longdesc>Whether animations should be displayed. Note: This is a global key, it changes the behaviour of the window manager, the panel etc.</longdesc>
</local_schema>
</entry>
<entry name="accessibility">
<local_schema short_desc="Enable Accessibility">
<longdesc>Whether Applications should have accessibility support</longdesc>
</local_schema>
</entry>
</dir>
<dir name="file-views">
<entry name="icon_theme">
<local_schema short_desc="File Icon Theme">
<longdesc>Theme used for displaying file icons</longdesc>
</local_schema>
</entry>
</dir>
<dir name="background">
<entry name="color_shading_type">
<local_schema short_desc="Color Shading Type">
<longdesc>How to shade the background color. Possible values are "horizontal-gradient", "vertical-gradient", and "solid"</longdesc>
</local_schema>
</entry>
<entry name="secondary_color">
<local_schema short_desc="Secondary Color">
<longdesc>Right or Bottom color when drawing gradients, not used for solid color.</longdesc>
</local_schema>
</entry>
<entry name="primary_color">
<local_schema short_desc="Primary Color">
<longdesc>Left or Top color when drawing gradients, or the solid color.</longdesc>
</local_schema>
</entry>
<entry name="picture_opacity">
<local_schema short_desc="Picture Opacity">
<longdesc>Opacity with which to draw the background picture</longdesc>
</local_schema>
</entry>
<entry name="picture_filename">
<local_schema short_desc="Picture Filename">
<longdesc>File to use for the background image</longdesc>
</local_schema>
</entry>
<entry name="picture_options">
<local_schema short_desc="Picture Options">
<longdesc>Determines how the image set by wallpaper_filename is rendered. Possible values are "none", "wallpaper", "centered", "scaled", "stretched".</longdesc>
<longdesc>The application to use for viewing files that require a component to view them. The parameter %s will be replaced by the file's URIs, the parameter %c will be replaced by the component IID.</longdesc>
</local_schema>
</entry>
</dir>
<dir name="terminal">
<entry name="exec_arg">
<local_schema short_desc="Exec Arguments">
<longdesc>Argument used to execute programs in the terminal defined by the 'exec' key.</longdesc>
</local_schema>
</entry>
<entry name="exec">
<local_schema short_desc="Terminal application">
<longdesc>Terminal program to use when starting applications that require one</longdesc>
